Kawasaki Moto

Archive for the ‘Kawasaki Vulcan 700’ Category

Buy @ Technical Details:The Rear Taillight illuminates with the application of either the front or rear brakes. The Taillight includes the lens and the housing to which the lens attaches. * A used Taillight will be in good overall condition. The lens will be clean and will not be cracked. Portions of the Taillight not visible when mounted may be scratched, scuffed and/or refurbished…

Buy @ Technical Details:The Front Wheel of the motorcycle is mounted on the Front Axle between the Front Forks. * A used Front Wheel will be straight and run true. All used wheels are checked for runout according to manufacturer specifications before being placed in inventory. Due to the nature of this component, stone chips, minor cosmetic blemishes and paint chips from tire change…

Buy @ Technical Details:The Left Rear Footpeg Bracket bolts to the frame on the right side (as you are sitting on the bike), and holds the Left Rear (passenger) Footpeg. The Left Muffler (if so equiped) is often attached to this bracket as well. * A used Footpeg Bracket will be straight, undamaged and fully functional. Due to its location on the bike, cosmetic imperfections and blem…

Buy @ Technical Details:The Right Front Footpeg Bracket bolts to the frame on the right side (as you are sitting on the bike), and holds the Right Front (rider) Footpeg. The Rear Brake Pedal is often attached to this bracket as well. * A used Footpeg Bracket will be straight, undamaged and fully functional. Due to its location on the bike, cosmetic imperfections and blemishes that d…

Buy @ Technical Details:The Pair of Front Forks mounts in the Triple Trees and holds the Front Wheel, Brakes, Fender, etc. Complete pair of Fork assemblies, including the inner and outer tubes and all internal parts. * Used Forks will be straight, clean, and will not leak. All mounting points for Brakes, Fender, etc. will be intact and undamaged. Adjustment screws will be undamaged…

Buy @ Technical Details:The Intake Manifolds mount between the Intake Ports on the Head and the Carburetor/Throttle Bodies. This is a complete set of manifold(s) for your motorcycle. * Used Intake Mainfolds will be intact and in good usable condition. They will not be cracked or dry-rotted, and will not leak. A thin film of light oil will help the Carbs/FI slip into the Intake Manif…

Buy @ Technical Details:The Kickstand (sidestand) is on the left side of the bike (as you are sitting on the bike), and keeps the bike from falling over while parked. * A used Kickstand will be straight and fully functional. Due to the location of this part on the bike, paint chips and cosmetic imperfections are considered normal wear. * Sample Picture of Kickstand Sidestand Shown,…

Buy @ Technical Details:The Left Front Footpeg Bracket bolts to the frame on the left side (as you are sitting on the bike), and holds the Left Front (rider) Footpeg. The Shifter is often attached to this bracket as well. * A used Footpeg Bracket will be straight, undamaged and fully functional. Due to its location on the bike, cosmetic imperfections and blemishes that do not effect…

Buy @ Technical Details:The Complete Transmission of a motorcycle consists of input and output shafts, gears, shift drum, and shift forks, along with various springs, retainers and clips. All pieces will be included. * A used Transmission will be complete and in good working condition. No broken teeth or gears, no excessive wear on any component. * Sample Picture of Transmission Com…

Buy @ Technical Details:4″ decal…